Home > Asus A7n8x > ASUS A7N8X E-deluxe & AMD Barton 3200+ RE: FSB

ASUS A7N8X E-deluxe & AMD Barton 3200+ RE: FSB

my ram is the kingston hyper x 1 gig (2x 512mb) pc 3200 cpu athlon xp 3200+ same mobo. CPU Ext Frequency = 200MHz CPU Frequency Multiplier Setting = Menu CPU Frequency Multiplier = 11.0x System Performance = User Defined CPU Interface = Optimal (Greyed out, not able to change) ray123 Joined: Aug 22, 2004 Messages: 130 Hello. Later I got a Rev 2 E which wouldn't go past 220. Source

Ask a question and give support. Then use both sticks. I also tried with 2.5 - 3 - 3 - 7 and nothing.Should i try to up the RAM Voltage for this or ? Enscheidend is dass beide rams 400fsb unterstüzen.

COPYRIGHT © 1998- · MECHLER ENTERPRISES, LLC. Only other fan I'm running is a 120mm at the front by the Hdd. Sie sind der Meinung, das war SPITZE!!!!!!! Atm.

Professional Unterstützt AMD Enhanced 3DNow! I have mine at 200*12.5 or wutever (2.5ghz) at 1.7V. i have not overclocked it. Gruß[/quote] son quatsch, sein speicher unterstützt 400 MHz.

Hat jemand das gleiche Problem schon mal gehabt? I have ran the machine overnight (12+ hours) with Prime95 with no errors, I have run UT2004 for 3 and 4 hours at a time without a hitch, and I have Then swap sticks and see if it still runs. http://www.hardwareanalysis.com/content/topic/25355/ The following is the way my settings look right now, and it's stable.

Unterstützt AMD 3DNow! I no longer have any problems running with the full FSB and above. PainApr 18, 2006, 9:20 PM The file error is not uncommon and is due to the machine not running properly. XP processors are guarded by the manufacturer.

And most importantly whos pushed their boards further? https://forum.pcmech.com/threads/asus-a7n8x-e-deluxe-amd-barton-3200-re-fsb.169518/ Click here to become a Hardware Analysis registered user. Should i try it with DDR Voltage 2.8 ? A BIOS update (with a modded BIOS) did the trick.

Prime95 lastet den PC aber aus, was meist innerhalb von 5minuten dafür sorgt, das das Programm einen Fehler meldet. this contact form Try the following: Use Asus Update to obtain the most recent version of Asus Update (if a newer version of Asus Update is available, attempting to download the BIOS from the Anyone have any clue??? I'm hoping to get some better memory later this week.

I've tried to change the FSB to 200, setting the Memmory setting to Agressive, AGP Frequency to 66, i've tried Vcore voltage from the default 1.650 all the way to 1.750 Also tried with FSB set to 166 making it 11x166 the default 2500+ and memory settings to 200 2.5-3-3-7 DDR Voltage 2.8, it did not start.Any ideas on that Windows thingy, Common put em to the test. have a peek here I also run two Hitachi 80 Gb SATA drives in RAID 0.

Falls Sie den Rechner partout nicht stabil zum Laufen bekommen, werden Sie sich wohl oder übel neuen Speicher kaufen müssen. also bitte im bios überprüfen und ggf. Related Resources Can I OC my AMD Athlon XP 3200+ with the ASUS A7N8X deluxe b Overclock amd athlon xp3200 with asus A7n8x-e deluxe Asus a7n8x deluxe gold 1.04 with XP

My compound has 65% silver in it ,hope it helps you out Feb 24, 2005 #3 tbrunt3 TS Rookie Posts: 313 Greetings and Welcome to Techspot I have the exact

I reached the 2375 MHz freq for AMD 2800+ Barton running stable at 190MHz fsb x 12.5 multiplier with 1.7vCore. I set my FSB to 200 making it 11x200 and set my memory settings to 2.5-3-3-7 at 200 and DDR Voltage to 2.8, it started without problems. Memtest runs just fine, just ran a 12 hour test in fact. Also make sure you have the latest bios.

These boards can handle alot more than your putting through them. Aber am Netzteil zu sparen ist bei Nforce2 Platinen ein großer Fehler. (Natürlich auch bei anderen Chipsätzen, ausserdem ist ein gutes Netzteil dafür verantwortlich, das der Rechner länger ohne Probleme seine Join thousands of tech enthusiasts and participate. Check This Out Windows XP with SP2 ASUS A7N8X-E Deluxe motherboard Athlon XP 3200+ Barton 400 FSB Spire cooling heatsink/fan 2x 512mb of kingston ddr 400mhz RAM Maxtor 120GB harddrive (master) Maxtor 200GB hardrive

the most daring i got was i upped the frequency to 200MHz but wouldn't restart and my multiplyer is locked @ 11x. 200 MHz is as high as it goes, and The standard adjustments would be 2.6, 2.7, 2.8, etc. still replacing the Ram that i just bought is on my top priority. I have an Antec Sonata case with a 380W Power Supply and I am thinking that the new 400MHz ram is drawing more voltage (or maybe it's the increase from 512MB

Johnson Mordachi Nov 25, 2004, 09:45am EST Reply - Quote - Report Abuse Private Message - Add to Buddy List >>Re: ASUS A7N8X-E DELUXE Who overcloched and how farI forgot For monitoring I use ASUS Probe latest version. Produktinformation http://www.phoenix.com/en/products/default.htm BIOS Aufrüstungen http://www.esupport.com/biosagent/index ... Just to note, I can run all of my memory timings at low numbers (6,3,3,2.5) with no problem having the bus at 198 and the DDR voltage at 2.7 Good luck